The molle ii assault pack has an approximate internal volume of 1525 cubic inches in the main compartment and 825 cubic inches in the large front pocket that is specifically sized to house a removable six magazine bandoleer or a standard protective mask and allow quick and easy access to it and can carry at least a 60-pound load to include the current family of field radios including sincgars and asip. The radio can be carried in a radio pouch attached to the rear panel of the pack utilizing the 1-inch oval loops.
Zipper closure for main compartment front has two external pockets, one with velcro closure and the other with zipper closure both secured by lock fasteners two extra fastener buckles near bottom front along the sides and front of pack are points for attaching optional pouches and lock-fasteners near the top and bottom of sides for security.
The pack attaches to the pack frame on top of the main pack, in lieu of a patrol pack, or is donned and doffed over the flc.
Top of pack features carrying handle and looped lock fastener straps shoulder straps have wide and narrow attachment points, with a center lock fastener just below chest nylon belt-strap with lock-fasteners to go around waist 2 drain eyelets near bottom of pack.
Back has a large compartment slit with translucent 2 x 3 in id window at the bottom of each shoulder strap there are quick release locks with snap-buttons for adjustment
The exterior sides and outermost surface of the pack contain PALS webbing to accomplish secure attachment/detachment of the modular pouches/pockets and other individual equipment items/carriers i.e., mattax, entrenching tool, two-quart canteen, etc. The pack is accessible through the top with a slide fastener closure and has a flap covering the opening and providing water resistance. There is a non-reflective slide in name holder for name identification on the exterior of the pack. The pack has drain holes.
There are two 30" type 8 webbing used for airborne operations inside the pack. These white straps are used for direct attachment to the parachutist snaphook described in fm 3-21.220 pg 12-5, item #17, for integration with the t-10 harness assembly described on pg 2-2 item #14. There is also a sewn-in lowering line attachment loop.
Will have some signs of use light fading dust for storage unit marks or name all zipper, button, stripes clips, etc., will be intact and in working order no holes, rips or tear. Army, navy, marines, air force, coast guard, national guard special forces, government issue navy seals, camping, hunting, fishing, hiking, trekking, scouting, traveling, bug out bag, doom. Day preppers soldier airsoft, bookbag military collector, great multi-purpose pack.
Dimensions:
Main pack: 20" high x 16" wide x8" depth.
Outer pocket: 14" high x 11" wide x 3" depth.
This item is used, but in good condition. It has some light mud stains. Zipper and buckle functions as designed.
The molle ii assault pack has an approximate internal volume of 1525 cubic inches in the main compartment and 825 cubic inches in the large front pocket that is specifically sized to house a removable six magazine bandoleer or a standard protective mask and allow quick and easy access to it and can carry at least a 60-pound load to include the current family of field radios including sincgars and asip. The radio can be carried in a radio pouch attached to the rear panel of the pack utilizing the 1-inch oval loops.
Zipper closure for main compartment front has two external pockets, one with velcro closure and the other with zipper closure both secured by lock fasteners two extra fastener buckles near bottom front along the sides and front of pack are points for attaching optional pouches and lock-fasteners near the top and bottom of sides for security.
The pack attaches to the pack frame on top of the main pack, in lieu of a patrol pack, or is donned and doffed over the flc.
Top of pack features carrying handle and looped lock fastener straps shoulder straps have wide and narrow attachment points, with a center lock fastener just below chest nylon belt-strap with lock-fasteners to go around waist 2 drain eyelets near bottom of pack.
Back has a large compartment slit with translucent 2 x 3 in id window at the bottom of each shoulder strap there are quick release locks with snap-buttons for adjustment
The exterior sides and outermost surface of the pack contain PALS webbing to accomplish secure attachment/detachment of the modular pouches/pockets and other individual equipment items/carriers i.e., mattax, entrenching tool, two-quart canteen, etc. The pack is accessible through the top with a slide fastener closure and has a flap covering the opening and providing water resistance. There is a non-reflective slide in name holder for name identification on the exterior of the pack. The pack has drain holes.
There are two 30" type 8 webbing used for airborne operations inside the pack. These white straps are used for direct attachment to the parachutist snaphook described in fm 3-21.220 pg 12-5, item #17, for integration with the t-10 harness assembly described on pg 2-2 item #14. There is also a sewn-in lowering line attachment loop.
Will have some signs of use light fading dust for storage unit marks or name all zipper, button, stripes clips, etc., will be intact and in working order no holes, rips or tear. Army, navy, marines, air force, coast guard, national guard special forces, government issue navy seals, camping, hunting, fishing, hiking, trekking, scouting, traveling, bug out bag, doom. Day preppers soldier airsoft, bookbag military collector, great multi-purpose pack.
Dimensions:
Main pack: 20" high x 16" wide x8" depth.
Outer pocket: 14" high x 11" wide x 3" depth.
This item is used, but in good condition. It has some light mud stains. Zipper and buckle functions as designed.
